Klondike Oil and Lubricants for Sale

Klondike Lubricants has Original Equipment Manufacturer Approval from:

1. Dexos 1 (GM)
2. Cummins
3. Detroit Diesel
4. Volvo
5. Mack
6. Renault
7. National Marine Manufacturers Association

Listed below are the Klondike Oil and Lubricants for sale.

Confused by all of the terminology? See our index for helpful information.

Agricultural

15w-40 CK-4

• designed for naturally aspirated and turbocharged heavy duty diesel engines in mobile and stationary equipment where the API CK-4 service category and SAE 15W-40 viscosity grade is specified.
• fully backwards compatible with, and replaces, service categories CJ-4, CI-4 Plus, and previous

30 TDTO-4

• KLONDIKE SAE 30 TDTO-4 designed for the needs of heavy duty mobile and stationary equipment where Caterpillar TO-4 or Allison C-4 fluids are specified.

AW 32 Advanced Formula

•  formulated for heavy duty hydraulic systems that operate in industrial and mobile equipment in all weather conditions

Universal Tractor Fluid Full Synthetic

• Full Synthetic, suitable for use in all forms of farm equipment

Automotive

5W-30 API SP/GF-6A Synthetic Blend

•  recommended for use in passenger cars, light trucks, sport utility vehicles, and other stationary or mobile engines

ATF Universal Full Synthetic

•  full synthetic automatic transmission fluid formulated for universal application in modern traditional automatic transmissions

0W-20 Dexos 1 Full Synthetic

• designed for maximum engine protection and exceptional fuel economy even under extreme driving conditions. 

Construction

15w-40 CK-4

• designed for naturally aspirated and turbocharged heavy duty diesel engines in mobile and stationary equipment where the API CK-4 service category and SAE 15W-40 viscosity grade is specified.
• fully backwards compatible with, and replaces, service categories CJ-4, CI-4 Plus, and previous

10W TDTO-4

• designed for the needs of heavy duty mobile and stationary equipment where Caterpillar TO-4 or Allison C-4 fluids are specified.

AW 46

•  for heavy duty hydraulic systems that operate in industrial and mobile equipment in all weather conditions

Ultra Tac Ep-2

• Heavy Duty Lithium complex grease
•  designed for extreme duty use in a wide variety of on-road, off-road vehicle and heavy equipment applications. Specially formulated to withstand extreme pressure in extended service wheel bearing and chassis applications

Exploration

0W-40 CK-4 Full Synthetic

• API Service Category CK-4 
• Ultra-low pour points and outstanding fluidity reduce stress at equipment startup and minimize wear in extreme low temperature conditions.

75W-90 GL-5 Full Synthetic

•  suitable for hypoid gears, manual transmissions and gear boxes in passenger cars and light trucks as well as on-road and off-road heavy duty equipment

Multi Viscosity AW 36

• Recommended for vane, piston, or gear-type hydraulic pumps in heavy duty, industrial machinery and mobile equipment where this viscosity is recommended

Long Life Turbine Oil ISO 46

• recommended for use in turbine systems operating on steam or gas as well as a high temperature bearing lubricant and coolant. 
• his product passes the ASTM-D-943 Turbine Oil Stability Test

Forestry

15w-40 CK-4

• designed for naturally aspirated and turbocharged heavy duty diesel engines in mobile and stationary equipment where the API CK-4 service category and SAE 15W-40 viscosity grade is specified.
• fully backwards compatible with, and replaces, service categories CJ-4, CI-4 Plus, and previous

AW 32 Advanced Formula

•  formulated for heavy duty hydraulic systems that operate in industrial and mobile equipment in all weather conditions

Hi-Tack Bar & Chain Oil

• An exceptional lubricant for open bearings, gears, and chains found in industrial applications such as sawmills, woodlands, mining operations, or anywhere a tacky, non-drip oil is required.

Ultra Tac EP-2

• Heavy Duty Lithium complex grease
•  designed for extreme duty use in a wide variety of on-road, off-road vehicle and heavy equipment applications. Specially formulated to withstand extreme pressure in extended service wheel bearing and chassis applications

Industrial

10W CF-2

• recommended for use in naturally aspirated, turbo-charged, or super-charged four-stroke diesel engines where SAE 10W engine oils meeting API CF specifications are required.

ISO 150 EP Full Synthetic

• excels in the lubrication of heavily loaded enclosed gear drives and reducers on drives of all sizes.

AW 46

•  for heavy duty hydraulic systems that operate in industrial and mobile equipment in all weather conditions

Moly Tac EP-2

• designed for extreme duty use in a wide variety of on-road, off-road vehicle and heavy equipment applications and is an ideal grease for heavy duty industrial applications where moly grease is required to reduce wear caused by sliding metal parts, rubbing surfaces, or severe vibration.

Marine Industry

15w-40 CK-4

• designed for naturally aspirated and turbocharged heavy duty diesel engines in mobile and stationary equipment where the API CK-4 service category and SAE 15W-40 viscosity grade is specified.
• fully backwards compatible with, and replaces, service categories CJ-4, CI-4 Plus, and previous

Bio AW 32

• readily biodegradable, non-toxic, ashless oil designed for high performance hydraulic systems in mobile and stationary equipment.

2-Cycle TC-W3

• Recommended for use in all water cooled 2 cycle outboard marine engines as well as other air-cooled and water-cooled applications, such as snowmobiles, personal water craft (PWC), jet skis, lawn mowers, snow blowers, all-terrain vehicles, chain saws, outdoor power equipment, and other applications requiring oils meeting API TC service category.

Mining Industry

0W-40 CK-4 Full Synthetic

• API Service Category CK-4 
• Ultra-low pour points and outstanding fluidity reduce stress at equipment startup and minimize wear in extreme low temperature conditions.

Bio AW 32

• readily biodegradable, non-toxic, ashless oil designed for high performance hydraulic systems in mobile and stationary equipment.

Rock Drill Oil

• designed for use as an air-line and operating lubricant for high air flow pneumatic drilling equipment operating in heavy duty service environments.

Moly Tac EP-2

• designed for extreme duty use in a wide variety of on-road, off-road vehicle and heavy equipment applications and is an ideal grease for heavy duty industrial applications where moly grease is required to reduce wear caused by sliding metal parts, rubbing surfaces, or severe vibration.